Weight Training for Runners: Lifts, Jumps and a Weekly Plan

Runner performing a half squat in a gym power rack, with the title Weight Training for Runners
Questions This Article Answers
  • What weight training menu (exercises, loads and reps) should a runner follow?
  • How many days a week should I lift, and how do I fit it into my training week?
  • How should runners do squats and deadlifts?
  • Which jumps should I do, and how many?

Weight training only helps a runner if it is something you can keep doing. This guide covers the lifts, jumps and drills I do in the gym and before every run, the research behind each choice, and the training log that goes with it.

This is the practical companion to our guide to strength training for runners, which explains why strength work helps runners and how much it helps. Here the focus is the menu itself: exercises, loads, sets, jumps and a sample week. Home routines with bodyweight and bands are covered in our companion guide to supplementary strength exercises.

My recommendation is to start with three lifts, the half squat, single-leg squat and Romanian deadlift, for 5 reps × 3 sets, once a week. Most studies used two to three sessions a week.

There are two ways to set the load. One is the heavy-load approach (80% of one-rep max or more), which has the most consistent research support. The other is the bar-velocity approach that I use myself.

My Training Log

I started weight training in the summer of 2021. At first I did squats for 10 reps × 3 sets, and the soreness hurt my running. Every time I started, I ended up injured and could not keep it going.

Now I train by bar velocity (velocity-based training, or VBT), and I have kept lifting without lingering soreness since I got a sensor in March 2025. I paused during a foot injury, but I am still at it.

Author: Runshu
Shuichi Hibino

I started running seriously after entering the workforce.
With theory-based training,
I challenge myself to see how far I can improve my record.
I am working on it with a competitive mindset
About me & PB history

Blood lactate concentration and blood glucose levels are also measured.
This is a scientific approach to marathon running.

★Personal bests
1500m 4:25(2022/08)
5000m 16:01(2022/09)
10000m 33:44(2021/12)
Half 1:12:29(2022/03)
Full 2:40:15(2026/03)

Author: Runshu
Shuichi Hibino

  I started running seriously after entering the workforce.
  With theory-based training,
  I challenge myself to see how far I can improve my record.
  I am working on it with a competitive mindset
   About me & PB history

  Blood lactate concentration and blood glucose levels are also
  measured.
  This is a scientific approach to marathon running.

  ★Personal bests
  1500m 4:25(2022/08)
  5000m 16:01(2022/09)
  10000m 33:44(2021/12)
  Half 1:12:29(2022/03)
  Full 2:40:15(2026/03)

TOC

The Runner’s Weight Training Menu: Start With These 3 Lifts

Here is the menu I actually follow. I lift about once a week, and I do the drills before every run.

ExercisePurposeReps × setsWhen
Half squatWhole-leg strength and fast force production5 reps × up to 3 sets (around 65 kg / 143 lb)Lifting day (about once a week)
Single-leg squatSingle-leg strength and stability5 reps per leg × up to 3 sets (around 50 kg / 110 lb)Lifting day
Romanian deadliftHamstrings and glutes5 reps × 3 sets (45 kg / 99 lb)Lifting day
Single-arm rowMaintaining upper-body strength10 reps × 3 sets (12 kg / 26 lb)Lifting day
Leg raiseAbs20 reps × 3 sets (bodyweight)Lifting day
Countermovement jump / squat jumpExplosive force5 reps × 3 sets (not doing these lately)Optional (lifting day)
A-skip / B-skipWarm-up20 steps eachBefore every run
Pogo jumpsWarm-up10 hops per legBefore every run
Rebound jumpsWarm-up10 repsBefore every run
Table: My menu (as of October 2026)

A lifting session takes 30-40 minutes, including the accessory exercises. As a minimum program, you can start with just the half squat, single-leg squat and Romanian deadlift.

Rules to Know Before You Build Your Weight Training Program

Setting the Load, Option 1: Heavy Loads (80% of 1RM or More)

Your one-rep max (1RM) is the heaviest weight you can lift for a single rep. The most consistent research support is for heavy loads of 80% of 1RM or more, which is roughly a weight you can lift for only 4 to 8 reps.

A pooled analysis of studies in runners※1 found that loads of 90% of 1RM or more tended to give the largest improvements in running economy (how efficiently you use oxygen at a given pace).

Another analysis※2 found improvements with heavy loads of 80% of 1RM or more, but not with low-to-moderate loads of 40-79%.

In one study, runners who did half squats with a load they could lift for only 4 reps, for 4 sets, three times a week for 8 weeks, improved their running economy by about 5%※3.

However, heavy weights can cause injuries if your technique is not yet solid. Start light to learn the movement, and add weight once it feels natural.

How Often and for How Long

In strength training studies with runners, twice a week was the most common frequency, and three times a week was also widely used※4.

A review of the research concluded that combining different types of strength training two to three times a week is likely to help the performance of middle- and long-distance runners※4.

Longer programs tended to work better. For heavy-load training, 10-14 weeks produced larger improvements than 6-8 weeks※1.

My Training Log

I lift about once a week (roughly three times every two weeks). That is less than the two to three sessions common in studies.

Don’t Leave Yourself Sore

If strength work leaves you sore, the quality of your runs over the next few days suffers. Pushing sets close to failure makes fatigue linger.

My Training Log

When I started weight training, I did full squats at around 60 kg (132 lb) for 10 reps × 3 sets. The soreness got in the way of my running, and every time I started, I ended up injured.

If I lifted right after a structured workout, the quality of the lifting dropped. If I lifted on an easy day, it affected the next day’s workout. I quit several times because of this. Now I lift later on the same day, with a gap of several hours.

Setting the Load, Option 2: Bar Velocity (Velocity-Based Training)

Velocity-based training (VBT) measures how fast you lift the bar and uses that speed, instead of a percentage of 1RM, to set the load and the number of reps. I explain how I started with VBT in Why I Started Velocity-Based Training as a Distance Runner, and why I think it suits distance runners in Velocity-Based Training for Runners: Why Use VBT?.

With VBT you set the load by speed because bar velocity and relative load (the percentage of 1RM) line up almost one-to-one.

In the half squat, the mean propulsive velocity at 1RM is about 0.33 m/s, and every 0.1 m/s increase in speed corresponds to a load roughly 8% of 1RM lighter※5.

So once you pick a target speed, you can adjust the load to how you feel that day without ever testing your 1RM. This assumes you move the bar with maximal intent.

In a 16-week experiment on the ankle muscles※6, a leg held fixed improved its ability to produce force quickly just as much as the leg that actually moved fast, as long as the person kept trying to move it quickly. The intent to move fast is thought to be the main stimulus.

One way to use VBT is to end a set once the bar speed falls a set percentage below your fastest rep. That drop is called velocity loss.

An experiment compared a group that stopped sets at 20% velocity loss with a group that continued to 40%※7. The 20% group did about 40% fewer reps, yet gained similar squat strength and improved jump height more.

Another experiment compared 0%, 10%, 20% and 40% velocity loss※8 (full squats at 70-85% of 1RM). The groups did not differ in sprint, jump or strength gains. Only the 40% group lost some of its ability to produce force quickly.

A review of studies on elite athletes※9 also suggests that a velocity loss of 10-20% may promote neuromuscular adaptation while reducing fatigue.

The participants in these experiments were young men and athletes. I have found almost no studies of VBT in runners specifically.

A meta-analysis comparing VBT with the traditional method of setting loads by a percentage of 1RM※10 found no difference in gains in strength, jumping or sprinting. I think the value of VBT lies less in being “more effective” than in making fatigue easier to manage.

In an 8-week experiment with 33 men experienced in both strength and endurance training※11, the group that kept velocity loss to 15% improved the running speed at which they reached maximal oxygen uptake more than the endurance-only group. This was not a comparison against the conventional method.

Using the velocity-load relationship, the heavy loads defined in studies (80% of 1RM or more) correspond, in the half squat, to a slow zone of about 0.6 m/s or slower in mean propulsive velocity※5.

My target speed is 0.9-1.1 m/s on the mean velocity my sensor shows. Plugging that into the same relationship puts me in a light, fast zone of roughly 35-55% of 1RM in the half squat.

However, the mean propulsive velocity in the study and the mean velocity on my sensor are calculated differently. There are also individual differences, so treat this as a rough range. It is an estimate, not a tested 1RM.

Half-squat lifting velocity versus load as % of 1RM: 80% of 1RM or more is about 0.6 m/s or slower; my 0.9-1.1 m/s target is roughly 35-55% of 1RM (estimate)
Half-squat velocity versus load as a percentage of 1RM (estimate), built from the relationship reported by Conceição et al. (2016)※5

Explosive training, which aims to produce force quickly, improved running economy about as much as heavy loads in a meta-analysis of multiple studies※12. This category includes jump training.

On the other hand, another analysis※2 pooled three studies of strength training at 40-79% of 1RM, or at the load that maximizes power, and did not confirm an improvement in running economy. There were few studies, and the authors say the result should be interpreted with caution.

In terms of weight, my approach overlaps with this low-to-moderate load category, and because I try to lift the bar fast, it also resembles explosive training. Which set of findings applies to me is unknown.

I have also not found a study that measured running economy with velocity-based training itself.

My Training Log

My method is as follows. My target is a mean velocity of 0.9-1.1 m/s, for 5 reps per set. When I reach 5 reps, I stop, even if velocity loss has not reached 10%. If the speed drops by more than 10% partway through the 5 reps, I stop there and lower the weight.

I rest 2-3 minutes between sets, for up to 3 sets per exercise. I measure velocity on the squat, single-leg squat and Romanian deadlift. For the Romanian deadlift the velocity is only a reference, not a target.

In the half squat, around 65 kg (143 lb) gives a mean velocity of about 0.9 m/s. I have not tested my 1RM.

This means I cannot claim that the running economy gains shown for heavy loads apply to my approach. My approach prioritizes staying free of lingering fatigue so I can keep going, along with producing force quickly.

If you don’t have a sensor, use these rules: stop at 5 reps per set, stop before your form breaks down, and don’t carry soreness into the next day. This is my own opinion.

Also, don’t keep going within a set until the bar visibly slows. The group that continued to 40% velocity loss lost some ability to produce force quickly※8.

Weight Training Exercises for Runners

Each exercise has an evidence label. A means the effect has been shown in experiments with runners. B means there is indirect evidence. C is my own rule of thumb, and I have not found a study that tested the exercise itself.

Half Squat (Evidence: A, When Lifting Heavy)

The half squat is the basic exercise for building whole-leg strength. Runners who did half squats with a load they could lift for only 4 reps, for 4 sets, three times a week for 8 weeks, improved their running economy※3.

The evidence A label applies to this heavy-load method. My velocity-based method (lighter loads, stopping at 5 reps) uses different conditions.

Rest the bar on your shoulders with your feet about shoulder-width apart, and bend your knees to roughly 90 degrees without rounding your back. Your knees should track in the same direction as your toes.

I do around 65 kg (143 lb) for 5 reps, up to 3 sets. Because I adjust the weight by velocity, it varies from day to day. It also depends on body size and strength, so treat it as one example.

Half squat (3 reps)

Single-Leg Squat, Rear Toe on the Floor (Evidence: C)

Because you stand up on one leg, the load concentrates on that leg more than in a two-legged squat. It builds single-leg strength and the ability to stabilize your body.

The ideal version, in my view, is a step-up, where you put one foot on a box and lift yourself with that leg. My gym has no box, so I rest only the toes of my back foot on the floor behind me.

The version with the back foot on a bench, the Bulgarian split squat, is covered in our companion guide to supplementary strength exercises.

I do around 50 kg (110 lb) for 5 reps per leg, up to 3 sets.

Single-leg squat (one side, 3 reps)

Romanian Deadlift (Evidence: C)

This exercise trains the hamstrings (back of the thigh) and glutes. These muscles extend the hip and help drive your leg backward while running.

With your knees slightly bent, hinge forward at the hips and lower the bar along your legs. Don’t rest the bar on the floor: lower it to mid-shin, then extend your hips to come back up.

I do 45 kg (99 lb) for 5 reps × 3 sets. I measure the velocity as a reference only, not as a target.

Romanian deadlift (about 4 reps)

Accessory Exercises on the Same Day (Evidence: C)

On lifting days I also do single-arm rows and leg raises as accessory exercises.

I do single-arm rows with 12 kg (26 lb) for 10 reps × 3 sets, and leg raises with bodyweight for 20 reps × 3 sets. The single-arm row is the same exercise as the one-hand row in our companion guide to supplementary strength exercises.

Leg raise

Plyometrics (Jumps) and Drills for Runners

Plyometrics is training that uses movements like jumping, in which a muscle and tendon are stretched and then immediately contract. I split mine into daily drills and the jumps I sometimes do on lifting days.

Daily Drills Before Your Run (Evidence: C)

Before every run, I do the following drills for 3-5 minutes.

Daily Drills
  • A-skip, 20 steps
  • B-skip, 20 steps
  • Pogo jumps, 10 hops per leg
  • Rebound jumps, 10 reps

Pogo jumps are small, quick hops in place that use only the spring of your ankles, with short ground contact. Your heels don’t touch the ground.

A small experiment found that adding jump exercises to the warm-up improved running economy on that day※13.

After 12 university students did squat jumps and other jumps for 2 sets × 8 reps each, their running economy at 7-10 km/h (4.3-6.2 mph) improved by 4-9%.

However, the participants were general students training under 5 hours a week, the speeds were slow, and the effect was for that day only. The exercises also differ from my drills, so the evidence is limited.

Pogo jumps
Rebound jumps

Jumps on Lifting Days (Optional, Evidence: B)

On lifting days, I sometimes do countermovement jumps (jumps with a quick dip beforehand) or squat jumps (jumps from a squat position). When I do, it is 5 reps × 3 sets. I haven’t kept this up lately, so I treat it as an option.

In an 8-week experiment with 60 well-trained male runners split into four groups※14, the group that added plyometrics once a week improved its 5 km time by 1.6-1.8%.

The improvement was larger than in the group without plyometrics.

The plyometric volume used in studies was 1-6 exercises, 1-6 sets and 4-10 reps per session, with 30-228 foot contacts※4. Programs started with 30-60 contacts in the first week and built up over 6-9 weeks.

However, plyometrics alone did not clearly improve performance.

Combining two or more methods, such as plyometrics with strength training, may produce larger effects※15. The certainty of this evidence is very low.

Periodization and a Sample Training Week

Periodization

I do this weight training all year round. As a race gets closer, the idea is to raise my target speed gradually from 0.9 m/s toward 1.1 m/s.

Our guide to strength training for runners proposes a schedule of maximal strength in the off-season, then muscular power and maintenance in-season. I adjust this by changing my target speed.

However, my speed range corresponds to lighter loads than the heavy loads shown to improve maximal strength in studies.

In the base building phase, I also add upper-body exercises such as the bench press and rows.

My Training Week

DayRunningDrillsWeights
MonEasy run + 5 stridesBefore the run—
TueLT runBefore the run—
WedLT runBefore the run—
ThuEasy jogBefore the run—
FriHigh-intensityBefore the run—
SatEasy jogBefore the run—
SunLT runBefore the run6-7 hours after the LT run (30-40 min)
Table: My training week (no rest days). LT run = lactate threshold run

I do the drills before every run, and the weights 6-7 hours after Sunday’s LT run. The strides on Monday are 5 reps of about 100-120 m (110-130 yd).

A meta-analysis found that doing aerobic exercise and strength training within 20 minutes of each other reduced gains in explosive strength, while a gap of 3 hours or more showed no clear decline※16. That is why I separate my LT run and my lifting by 6-7 hours.

However, that analysis covered healthy adults in general, and I have not found a study with a gap as long as 6-7 hours. For the research on which to do first, see the same-day order section of our strength training guide.

My strides have become easy to run faster than 4:01/mile (2:30/km). However, a meta-analysis of middle- and long-distance runners※15 has not clearly confirmed that strength training improves sprint ability.

I also can’t directly attribute my recent gains in running fitness to weight training or VBT.

What You Need at the Gym

I do my weight training at a gym. I use a barbell, a squat rack, a bench and dumbbells (for single-arm rows). My gym has no box for step-ups.

To measure bar velocity, I use an Enode sensor, made and sold by BM Sports Technology in Germany. A sensor is not required.

Where to Buy Enode

The maker’s official store (enode.ai, Germany). Shipping and, depending on your country, import taxes are extra

I bought mine in March 2025 directly from the maker’s official store. Check the seller’s terms before you buy.

For home exercises and the equipment for bodyweight and band training, see our companion guide to supplementary strength exercises.

Publication
Published ebook series (Sub-3, Sub-4, Threshold Training)

"You might be putting in the mileage but missing something in how you train" — volume, intensity, and frequency all have to line up before your times improve. A 3-book series built on real, measured blood lactate data.

Publication
Published ebook series (Sub-3, Sub-4, Threshold Training)

"You might be putting in the mileage but missing something in how you train." A 3-book series built on real, measured blood lactate data.

Frequently Asked Questions

Will weight training make me gain weight?

A review of studies on runners who added strength training※4 found no negative changes in body composition (such as the proportions of muscle and fat).

How many times a week should I lift?

Studies mostly used two to three sessions a week※4. I lift about once a week, which is less than in studies. You can start with once a week and add sessions as you check your form and fatigue.

What should I do if I’m still sore?

If your running quality drops the next day, reduce the weight and reps. I use bar velocity to lower the weight or end sets early.

Can I use the velocity-based approach without a sensor?

Yes. Stop at 5 reps per set, stop before your form breaks down, and don’t carry soreness into the next day. If the bar visibly slows within a set, end that set.

Can I do this without a gym?

Heavy exercises need gym equipment. At home, you can start with the exercises in our companion guide to supplementary strength exercises. If you have pain or a medical condition, consult a doctor or specialist.

Summary

Key Takeaways
  • Start with the half squat, single-leg squat and Romanian deadlift, 5 reps per set, once a week (my recommendation; studies most often used two to three sessions a week)
  • There are two ways to set the load. The most consistent research support is for heavy loads of 80% of 1RM or more. I set the load by bar speed, which my estimate puts at roughly 35-55% of 1RM, a light and fast zone
  • Ending sets based on velocity loss kept strength and jump gains while cutting reps (studies of squats in young men at loads such as 70-85% of 1RM)
  • Add 3-5 minutes of jump drills before every run (my rule of thumb)
  • Lift several hours after your LT run rather than right next to it (my routine). For the research on order, see our strength training guide

References

※1 Eihara Y et al. (2022) “Heavy Resistance Training Versus Plyometric Training for Improving Running Economy and Running Time Trial Performance: A Systematic Review and Meta-analysis” Sports Medicine Open

※2 Llanos-Lagos C et al. (2024) “Effect of Strength Training Programs in Middle- and Long-Distance Runners’ Economy at Different Running Speeds: A Systematic Review with Meta-analysis” Sports Medicine

※3 Støren Ø et al. (2008) “Maximal strength training improves running economy in distance runners” Medicine & Science in Sports & Exercise

※4 Blagrove RC et al. (2018) “Effects of Strength Training on the Physiological Determinants of Middle- and Long-Distance Running Performance: A Systematic Review” Sports Medicine

※5 Conceição F et al. (2016) “Movement velocity as a measure of exercise intensity in three lower limb exercises” Journal of Sports Sciences

※6 Behm DG, Sale DG (1993) “Intended rather than actual movement velocity determines velocity-specific training response” Journal of Applied Physiology

※7 Pareja-Blanco F et al. (2017) “Effects of velocity loss during resistance training on athletic performance, strength gains and muscle adaptations” Scandinavian Journal of Medicine & Science in Sports

※8 Pareja-Blanco F et al. (2020) “Velocity Loss as a Critical Variable Determining the Adaptations to Strength Training” Medicine & Science in Sports & Exercise

※9 Włodarczyk M et al. (2021) “Effects of Velocity-Based Training on Strength and Power in Elite Athletes—A Systematic Review” International Journal of Environmental Research and Public Health

※10 Liao KF et al. (2021) “Effects of velocity based training vs. traditional 1RM percentage-based training on improving strength, jump, linear sprint and change of direction speed performance: A Systematic review with meta-analysis” PLoS ONE

※11 Sánchez-Moreno M et al. (2021) “Effects of Velocity Loss Threshold Within Resistance Training During Concurrent Training on Endurance and Strength Performance” International Journal of Sports Physiology and Performance

※12 Denadai BS et al. (2017) “Explosive Training and Heavy Weight Training are Effective for Improving Running Economy in Endurance Athletes: A Systematic Review and Meta-Analysis” Sports Medicine

※13 Wei C et al. (2020) “A Plyometric Warm-Up Protocol Improves Running Economy in Recreational Endurance Athletes” Frontiers in Physiology

※14 Filipas L et al. (2023) “Effects of plyometric training on different 8-week training intensity distributions in well-trained endurance runners” Scandinavian Journal of Medicine & Science in Sports

※15 Llanos-Lagos C et al. (2024) “The Effect of Strength Training Methods on Middle-Distance and Long-Distance Runners’ Athletic Performance: A Systematic Review with Meta-analysis” Sports Medicine

※16 Schumann M et al. (2022) “Compatibility of Concurrent Aerobic and Strength Training for Skeletal Muscle Size and Function: An Updated Systematic Review and Meta-Analysis” Sports Medicine

Comments

To comment

CAPTCHA


TOC